Floor loading, clear height and loading area: how to read a warehouse spec sheet in Thailand
When you compare a warehouse for rent in Thailand, the spec sheet comes down to three numbers: floor loading, clear height and loading area. SCX Logistics, the warehouse business of SCX Corporation, rates its standard warehouse buildings at 4 tons per square metre. They have a 12 m clear height and one dock with a leveller for every 1,000 sqm. Read those three lines well, and most of the shortlist sorts itself.
Most people looking at warehouses and factories for rent start with two questions: where is it, and how much is it? Fair enough. But the tenants who end up happy a year later usually asked a third: will this building actually do what we need it to do? The answer sits on a single page that most people skim.
What does floor loading mean on a warehouse spec sheet?
Floor loading refers to the weight a floor slab is designed to support per square metre. At SCX Logistics, standard warehouse buildings are designed for a floor loading capacity of 4 tons per square metre. This rating helps determine whether a facility can accommodate high storage racks, forklifts moving between aisles, and heavy machinery.
Consider a fully loaded pallet racking system several levels high. Its weight is transferred to the floor through relatively small contact points at the base of each upright. If the floor cannot accommodate these concentrated loads, additional reinforcement or adjustments to the racking design may be necessary. These changes can increase setup costs or limit storage height, reducing the usable capacity of the space.
Warehouse and factory buildings may have different floor loading specifications to suit their intended uses. For example, warehouse buildings are designed for 4 tons per square metre, while factory buildings are rated at 3 tons per square metre. Storage and production operations have different loading requirements, so the appropriate specification depends on the intended use of the facility. The key is to select a building that meets operational needs, rather than simply choosing the highest rating.
Why is clear height important for warehouse operations?
Clear height is the usable height from the floor to the lowest thing hanging from the roof, and in a standard SCX warehouse building it is 12 m. It tells you how high you can stack before you need more floor space.
This is where many cost comparisons go wrong. Two buildings can offer the same floor area and still store very different volumes. A taller building lets a business grow upward, and growing upward is usually cheaper than leasing more floor. When a tenant compares rent, the fairer comparison is often cost per cubic metre of usable space, not cost per square metre of floor. Height only pays off if the racks can use it, and that depends on where the columns stand. SCX sets its building column span for selective racking, so aisles line up between columns with little space lost around them.
Factory buildings at SCX run a lower clear height of 12 m, which suits most assembly and light manufacturing lines, where the work happens at bench height rather than on the top shelf.
How should you read the loading area?
The loading area is where trucks manoeuvre, reverse and transfer goods between vehicles and the warehouse. Its layout and available space play an important role in keeping loading and unloading operations efficient. At SCX Logistics Bangna Km.20, the loading area is 30–32 metres wide, providing space for truck manoeuvring and loading activities. Loading facilities, including docks and dock levellers, are also provided to support warehouse operations, depending on each facility's specifications.
Consider a busy morning. Inbound trucks arrive from suppliers while outbound vehicles prepare to deliver goods to stores. Limited manoeuvring space or insufficient loading facilities can lead to queues, longer waiting times and delays to delivery schedules. A well-designed loading area helps accommodate vehicle movements and supports smoother day-to-day operations.
Another important consideration is the foundation beneath the loading area. At SCX Logistics, the loading area is supported by piling, a structural approach intended to provide support and help manage settlement over time. Maintaining an appropriate level between the loading area and the warehouse floor is important for safe and efficient forklift movement. Dock levellers also help bridge the height difference between the loading dock and truck bed, making loading and unloading more convenient.
What does the raised floor tell you about flood risk?
The raised floor is the flood line on a spec sheet, and SCX warehouse floors sit at +1.30 m. That figure is measured from the loading area, so it only tells half the story.
At SCX's Bangna sites, the layers add up. Project roads are 30 cm above the public road. Loading areas sit a further 10 cm higher. The warehouse floor then rises 1.3 m above the loading area, which puts it 1.7 m above Bangna–Trad Road. With the road typically about 1.1 m above mean sea level, the floor ends up around 2.8 m above sea level. The drainage system also has a flood gate where it meets the public canal, which can be closed during high water to stop backflow.
So when a spec sheet says "+1.30 m", the useful follow-up question is: above what? Factory buildings sit closer to the ground at +0.30 m, so equipment and materials can roll straight in.
What should you look for in the office block?
The office block is the last line on most spec sheets, and it often decides how fast a tenant can actually start work. SCX office buildings are laid out so tenants can fit air conditioning and arrange workspaces quickly, with separate corridors for restrooms and stairs.
A few practical details stand out. There is a server room on the second floor, ready for network setup, and a balcony space set aside for an air compressor. Restrooms are separated for office and warehouse staff. Each office building also has its own emergency staircase from the second floor, in line with Thai fire safety regulations.
What do SCX Logistics' warehouse and factory specifications include?
SCX Logistics offers warehouse and factory facilities with specifications designed to support different operational requirements. Across its portfolio, the key specifications include:
| Specification | Warehouse Building | Factory Building |
|---|---|---|
| Floor loading | 4 tons/sqm | 3 tons/sqm |
| Clear height | 12 m | 10 m |
| Loading area width | 30–32 m | 30–32 m |
| Loading facilities | Loading docks with dock levellers | Shutter doors |
Specifications may vary by project and building type. Businesses should check individual project details for facility-specific features and availability.
Where can you rent a ready-built warehouse near Bangkok?
For businesses that need to serve Bangkok, the closest SCX options sit on Bangna–Trad Road in Samut Prakan, east of the city. SCX Logistics leases ready-built and built-to-suit warehouse and factory space at two sites there.
SCX Logistics Bangna Km.20 is the larger site, with 80,000 sqm of leasable space and units from 1,700 to 25,000 sqm. SCX Logistics Bangna Km.23, a few kilometres further east at Soi Wat Bua Roi, has 17,000 sqm in units of 3,000 to 5,000 sqm. Both follow the warehouse specification above: 4 tons per square metre, 12 m clear height, and one dock per 1,000 sqm.
Which Bangna–Trad road locations suit distribution to both Bangkok and the Eastern Seaboard?
Bangna–Trad Road runs east from Bangkok through Samut Prakan toward Chonburi, making it a strategic corridor for businesses serving both Bangkok’s consumer markets and the Eastern Seaboard. For distribution operators managing both markets, the location offers a practical balance between access to urban customers and connections to industrial areas.
SCX Logistics operates two sites along this corridor. SCX Logistics Bangna Km.20 offers approximately 80,000 sqm of leasable space, with warehouse units ranging from 1,700 to 25,000 sqm. SCX Logistics Bangna Km.23 provides a further 17,000 sqm, with units ranging from 3,000 to 5,000 sqm. Both locations offer options for businesses with different space requirements.
For businesses with operations closer to the coast or a stronger focus on manufacturing and exports, SCX Logistics also offers warehouse and factory facilities in Chonburi.
What warehouse and factory options are available across SCX Logistics locations?
SCX Logistics offers ready-built warehouse and factory facilities, alongside Built-to-Suit solutions, across key logistics and industrial locations in Thailand. Each location provides different facility options to support distribution, storage and manufacturing requirements.
Bangna: Two sites at Km.20 and Km.23 offer approximately 97,000 sqm of combined space. SCX Logistics Bangna Km.20 provides both ready-built facilities and Built-to-Suit options, while SCX Logistics Bangna Km.23 offers ready-built warehouse and factory buildings. Standard warehouse specifications include 4 tons/sqm floor loading and 12 m clear height.
Laem Chabang: Across SCX Logistics Laemchabang 1 and SCX Logistics Laemchabang 2, businesses can choose between General Zone and Free Zone facilities, including warehouses and factory buildings. Warehouse specifications include 4 tons/sqm floor loading and 12 m clear height, while Free Zone factory buildings at SCX Logistics Laemchabang 1 offer 3 tons/sqm floor loading and 10 m clear height.
Amata Chonburi: SCX Logistics Amata Chonburi Phase 9 offers both ready-built factory and warehouse/factory buildings. Factory buildings feature 3 tons/sqm floor loading and 10 m clear height, while the warehouse/factory building provides 4 tons/sqm floor loading and 12 m clear height, together with loading docks, dock levellers and a sprinkler system.
A quick checklist before the site visit
Before booking a viewing, it helps to hold the spec sheet against your own operation:
Weight: what is the heaviest thing that will sit on the floor, and does the rating cover it?
Height: how high do you plan to rack, and does the clear height leave room for sprinklers and lighting?
Trucks: how many trucks load at your busiest hour, and are there enough docks?
Use: could storage turn into light assembly later? SCX buildings are designed to support both warehouse and factory operating licences, subject to the required approvals.
Fit: does a ready-built unit work, or does your process need a built-to-suit layout? SCX's specialised solutions include manufacturing facilities, temperature-controlled and cold storage, dangerous goods (DG) storage, Free Zone and bonded establishments, automation and conveyor systems, and racking systems. Which ones apply depends on the site, so it is worth confirming per location.
Frequently asked questions
What floor loading should a warehouse in Thailand have?
It depends on the racking and equipment, but SCX's standard warehouse buildings are rated at 4 tons per square metre, which supports high racking and forklift traffic directly on the slab.
What is a good clear height for a warehouse?
SCX's standard warehouse buildings offer 12 m of clear height. Factory buildings offer 10 m, which suits most assembly lines.
How many loading docks does an SCX warehouse have?
One dock with a leveller for every 1,000 sqm of warehouse space, so a 10,000 sqm unit has ten.
Does SCX offer warehouse and factory space for rent near Bangkok?
Yes. SCX Logistics leases ready-built and built-to-suit warehouse and factory space at SCX Logistics Bangna Km.20 and SCX Logistics Bangna Km.23 on Bangna–Trad Road, Samut Prakan.
About SCX corporation
SCX Corporation, a subsidiary of SC Asset Corporation Public Company Limited, serves as SC Group’s second engine of growth, building resilient recurring income businesses that support the Group’s long-term sustainable growth. Its portfolio comprises SCX Logistics, SCX Hospitality and SCX Working Solutions, spanning warehouses and logistics facilities, hotels, office properties and clean energy solutions. Guided by its vision, ‘The Prospering Expedition’, and mission, ‘For The Way Forward’, SCX creates long-term value through investment, development and strategic partnerships.
For more information, visit www.scx.co.th.